GPOE-16-A

Discussion in 'Main Forum' started by -FAQ-, Sep 8, 2017.

  1. -FAQ-

    -FAQ- Member

  2. poeworld

    poeworld Administrator Staff Member

    1. This model has the power on all the time, it works great with the AP AC Pro.

    2. With 802.3af cameras - it is automatic. If your cameras (like Hikvision and Swann) are marked " 12v, PoE " then they are also automatic. If your cameras are like the Foscam non-PoE (5v or 12v) then you need our converter to step down from 48 volt to 5 volt or 12 volt - because 5 volt cannot be reliably distributed over Ethernet cable at distances over 10 feet, but with 48 volt 328 feet or 100 meters is not a problem.

    3. The Ubiquiti AC Lite are mode B devices, using 24 volts. You should not apply 48 volts to the 24 volts UBNT products. Instead, please see the GPOE-6-24v60w (WS-GPOE-6-24v60w) for use with the UAP-AC-Lite.
    ______________________________________________________________________________________________________________

    *This product is equivalent to the WS-POE-16-A

    Here you will find the link to our POE-16-A injector:
    https://shopify.poe-world.com/products/gpoe-16-a-gigabit-poe-injector
     

Share This Page